MC-AnchorSolid E820

Highly reactive anchor adhesive for bonded anchors in non-cracked concrete

Talk to a specialist ...

Properties

Ready to use 2-component epoxy-based anchor adhesive
Suitable for dry and wet non-cracked concrete
Applicable with threaded rods and rebars
Rapid strength development for early initial loading
High compressive and tensile strength
Thixotropic and stable for vertical and overhead application
Very low application temperature
REACH exposure: water contact permanent, inhalation periodic, processing and application
Environmental Product Declaration EPD

Anchoring work for static and quasi-steady loads in horizontal, vertical and overhead areas
Approved system for use in uncracked concrete from C20/25 to C50/60
Anchoring for dry and permanent wet interior and exterior components, with and without especially aggressive conditions
Anchoring of threaded rods and rebars for fixings of attachements e.g. consoles, railings, storage racks, awnings, scaffolding, suspended ceiling, building technology, etc.
Approved as bonded anchor according to European Technical Assessment (ETA-15/0506)
Manual application with the MC-Fastpack Power-Tool