OS 8 surface protection system
MC-DUR TopSpeed

Our OS 8 surface protection system with MC-DUR TopSpeed offers a rigid coating with very high mechanical resilience and a very good cleanability to EN 11998. Furthermore, it boasts very short overworking times and rapid curing to final strength, and it is totally resistant to UV and yellowing and open to water vapour diffusion.

OS 8 surface protection system <br/>MC-DUR TopSpeed
foe_tablehead_1 foe_tablehead_2 foe_tablehead_3 foe_tablehead_4
1 Primer MC-DUR TopSpeed SC approx. 300 g/m²
2 Scratch coat (where required) MC-DUR TopSpeed SC + quartz sand 0.1–0.3 mm + thixotropic agent MC-Stellmittel TX 19 (1 - 3 %) approx. 600 g/m² + approx. 600 g/m²
3 Dry-shake layer MC-DUR TopSpeed SC + quartz sand 0.1–0.3 mm + thixotropic agent MC-Stellmittel TX 19 (1 - 3 %) approx. 900 g/m² + approx. 900 g/m²
Dry shake Quartz sand in excess
4 Top seal coat MC-DUR TopSpeed approx. 500 g/m²

mc_foe_brochures

abs 123 abs 123 abs 123 abs 123 abs 123 abs 123 abs 123